• Prouducts
  • 1

ACCESS-02

  • Fully Weatherproof Fingerprint ID Keypad Access Control System with 5PCS ID Key Fobs, WG26/34 Card Reader Access Controller Support 5000 Users, Backlight, Plastic Shell, Acrylic Panel
    • 【Multiple users, Multiple Unlocking Methods】 Support open the door for fingerprint identification, swiping ID card, password options, Support 5000 user capacity, come with 5PCS ID key fobs.
    • 【Simple Set-ups and Easy Installation】The access control full programming from the keypad. Fingerprinting technology. Support Wiegand 26/34 input output, Can be used as a standalone access controller or reader.
    • 【Weatherproof】The main board Is completely encapsulated In Epoxy, anti-vandal and weatherproof, support weatherproof, suitable for mounting either indoor or outdoor.
    • 【Touch Password Panel Backlight】Access control keypad is acrylic touch panel, LEDs display the working status, blue backlight features keys. The digits number can be seen even at dark.
    • 【High Security and Widely Used】Access control system able to deterring unauthorized personnel, Suitable for apartment, office, access control, off-limit area, hotel locks, school campus access, identification, Car park entrance, etc.
Introduction
Fingerprint ID Keypad

Completely weather resistant and weatherproof, and able to work in almost any condition, this advanced fingerprint access control machine, support password ID card fingerprint unlock, easy to install, programmable, Protect personal property, businesses, or off-limit areas.

Biometric Fingerprint

The access control full programming from the keypad. Biometric fingerprinting technology.

Support 5000 standard users, Supports ID Card, Password, Fingerprint unlock, can add user and delete user as your requirement.

Important Notice:

Compatible EM standard card (Can't support some encrypted cards,such as HID, Cobra, APCiK, etc)

Important Notice:

  • It's a wired keypad, for garage door/sliding door openers, please make sure your garage door/sliding door openers is compatible with the keypad.
  • If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then it's compatible with the keypad.
  • The wired keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V-24V power supply control.
ID Keyfob

Come with 5PCS ID key fobs. 125kHz ID Proximity ID token tag key keyfobs for access control.

Important Notice: Compatible EM standard card (Can't support some encrypted cards,such as HID, Cobra, APCiK, etc)

Access Control System
Package
Package includes:
  • 1 x Fingerprint Access Control keypad
  • 5 x 125kHz ID Keyfobs
  • 1 x Screw Package (Include Wrench)
  • 1 x User Manual

Features:

  • Completely epoxy encapsulated, weatherproof, high security.
  • Support Wiegand 26/34 input output, it is powerful, stable and reliable, including card reader mode, all-in-one mode and many other functions.
  • Full programming from the keypad, built-in proximity card reader, touck backlight keys.
  • With lock relay output, Lock output current short circuit protection, Very low power consumption.
  • Red, Yellow and Green LEDs display the working status. Secure / normal Mode, NO / NC output.
  • Material: Plastic Shell, Acrylic Panel
  • Frequency: 125khz
  • Input Voltage :DC 12V
  • Card Reading Distance: ≤5cm/2.0in
  • Quiescent Current: ≤30mA
  • Electric lock output: ≤1A
  • Operation Temperature: -35℃~55℃ / -31℉~131℉
  • Supports Home, Garage, Office, or Gate Use.
 
keyfob

ID Keyfobs: (Read only, not HID card, can not be programmed, not rewritable)

  • Works as a regular 125KHz ID
  • Card type: Standard EM card
  • Chip: Tk4100
  • Compatible with standard EM ID access devices or ID reader
  • Contactless transmission of data and supply energy
  • Card material: PVC
  • Detection distance: 2-10mm
  • Read only, not HID card, can not be programmed, not rewritable
  • Each card pre-programmed with a unique ID number, first 10 digitals are printed on the card
  • Compatible with other universal 125kHz tags like EM4100/4102, Suitable for 125kHz ID proximity access control system and ID management system
 
Waterproof

The main board Is completely encapsulated In Epoxy, anti-vandal and weatherproof, support weatherproof, suitable for mounting either indoor or outdoor.

Access control keypad is acrylic touch panel, LEDs display the working status, blue backlight features keys. The digits number can be seen even at dark.

Wiring

TF1AS wring

Important Notice:

Important Notice:

  • It's a wired keypad, for garage door/sliding door openers, please make sure your garage door/sliding door openers is compatible with the keypad.
  • If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then it's compatible with the keypad.
  • The wired keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V-24V power supply control.

More Products

  • TF3LCD-TWF
  • TF1
  • T12-TWF
  • ID-Keyfobs
  • S602-TWF
  • ACCESS-03
  • S601ID
  • TF3-TWF